RasPiO Duino Assembly Instructions
There are three levels of instructions.
Video
The most comprehensive is the video. It also gives you lots of extra information about the RasPiO Duino as you watch me put one together and talk about it as I go. It is very thorough and quite long, but highly recommended if you have the time.
After assembly, the setup instructions take you through software installation and setup.
Slideshow
If you’re super-confident with your soldering and just want to know where to put each component, you might prefer the slideshow, which is probably the quickest approach if you’re in a hurry. You’ll miss out on all the background information though. But this is the option you might want to choose if you know more about this sort of stuff than I do…
Individual Photos
If you prefer something in between, and want the chance to zoom in on the photos to get a better look, this third option might be for you. Here we will show each of the photos from the slideshow with a short explanatory text (as the caption). Each photo can be clicked for a higher resolution version.
RasPiO Duino Kit Contents
Step 1: solder 330R resistor R3 (orange, orange, brown, gold) on the bottom side of the board
Step 2: solder 10k resistor (brown, black, orange, gold) R1
Step 3: solder chip socket
Step 4: solder ceramic resonator U3
Step 5: solder 100 nF capacitor C3
Step 6: solder 22 pF capacitors C1 & C2
Step 7: solder male headers
Step 8: solder female headers
Step 9: solder LED
Step 10: solder 26-way Pi header
Step 11: solder 13-way male header
Step 12: fit ATMEGA328P-PU chip
Step 13: fit jumpers (Tx/Rx optional)
Step 14: admire finished product
Step 15: make foam spacer between HDMI port and Duino
After assembly, the setup instructions take you through software installation and setup.